bending strength การใช้

• The dire wolf canines had greater bending strength than those of extant canids of equivalent size.
• Smaller chips, such as the size of 0402, reached in all types of ceramics larger bending strength values.
• The corrugations increase the bending strength of the sheet in the direction perpendicular to the corrugations, but not parallel to them.
• Interestingly, although the buckling strength; higher R / t ratios lead to improved bending strength, but weaker buckling strength.
• With special design features, particularly by special design of the electrodes and the terminations, the bending strength can be improved.
• Machine grading measures a characteristic such as stiffness or density that correlates with the structural properties of interest, such as bending strength.
• It is extremely important that UHTCs are able to retain high bending strength and hardness at high temperatures ( above 2000 癈 ).
• This is because the bending strength of a tubular structure ( such as a bone ) is much more efficient relative to its weight.
• The bending strength of most Bioglass is in the range of 40 60 MPa, which is not enough for load-bearing application.
• To increase the bending strength and reduce the swelling and shrinking behavior, laminated wood is interlocked with some transverse veneers for certain applications.
• The bending strength of the MLCC chip differs by the property of the ceramic, the size of the chip and the design of the capacitors.
• Tensile strength of SiSiC and Al 2 O 3 were calculated from measurements of elongation to fracture and Young's modulus, since generally only bending strength data are available for those ceramics.
• The bending strength of sea ice is so low that usually the ice breaks without noticeable change in the vessel's bow onto the ice to break it under the weight of the ship.
• Due to its physical properties, such as bending strength, inter-node distance, and leaf surface area, the Muhimbi is favoured by chimpanzees for their daily construction of sleeping platforms or  nests.
• The theory that governs plate design should not be used in design of SPW structures since the relatively high bending strength and stiffness of the beams and columns have a significant effect in the post-buckling behavior.
• Without any special design features, NP0 / C0G class 1 ceramic MLCC chips reach a typical bending strength of 2mm while larger types of X7R, Y5V class 2 ceramic chips achieved only a bending strength of approximately 1mm.
• Without any special design features, NP0 / C0G class 1 ceramic MLCC chips reach a typical bending strength of 2mm while larger types of X7R, Y5V class 2 ceramic chips achieved only a bending strength of approximately 1mm.
• Bending strength of a metal pipe might actually depend on how the pipe is formed-Edison's suggestion that it is identical to the outer ring of a solid cylinder might not take into account anisotropy or lattice structure.